officialdwash

ms-ashri:

taumpytears:

n-thinks:

This video clocks in at 14:52, but it’s worth it. A couple thinks that a dying electrical Halloween decoration is either possessed or haunted. Features some choice lines such as:

"He’s being an asshole."
"Me?"
"No, the skeleton."

They start asking the skeleton decoration questions, and wait until you see what happens when the decoration actually starts working as intended.

If nothing else, watch the first two minutes then skip to the ten minute mark. I’m crying from how hard I’m laughing.

CAUTION REAL DEMONS!!! 

this is one of my favorite spooky videos

rocketguntech
bolt-carrier-assembly:

sdkfz142:

Garand Thumb - Imgur
Some of you might have heard the term “Garand-Thumb” or “M1-Thumb”. That is the name for when the bolt of an M1 Garand slams closed on your thumb. A Garand-Thumb often occurs when you try to close the bolt on an empty magazine. To close the bolt on an unloaded M1 Garand you need to push down on the magazine follower before the bolt can close, and if your finger doesn’t get out of the way in time it’ll be caught. Often people will get a Garand-Thumb because the bolt has not been pulled fully to the rear. When the bolt is to the rear it is locked in place by the bolt catch and won’t be released until you relieve the pressure on it. However if you don’t manage to get the bolt all the way back it might rest on the magazine follower instead of the bolt-catch, and it might slam shut without warning.

High-Speed footage of a Garand-Thumb.

Here is a clip of me purposely giving myself a Garand-Thumb, recorded at 1200 frames per second. As you can see, the bolt was resting on the follower and released as soon as I touched it with my thumb.



Not being completely satisfied with the previous clip, I recorded one more. Don’t try this at home (unless you are recording it)




Here is what the clip looks like in real time, to give you an idea of how suddenly the bolt can slam shut.


Garand thumb is no joke. I had my Saiga-12 close on my thumb during a competition while loading a single shell. The extractor went into my thumb a bit. I finished the round but got blood all on my gear. these gifs hurt to look at.

bolt-carrier-assembly:

sdkfz142:

Garand Thumb - Imgur

Some of you might have heard the term “Garand-Thumb” or “M1-Thumb”.
That is the name for when the bolt of an M1 Garand slams closed on your thumb.
A Garand-Thumb often occurs when you try to close the bolt on an empty magazine. To close the bolt on an unloaded M1 Garand you need to push down on the magazine follower before the bolt can close, and if your finger doesn’t get out of the way in time it’ll be caught.
Often people will get a Garand-Thumb because the bolt has not been pulled fully to the rear. When the bolt is to the rear it is locked in place by the bolt catch and won’t be released until you relieve the pressure on it.
However if you don’t manage to get the bolt all the way back it might rest on the magazine follower instead of the bolt-catch, and it might slam shut without warning.

High-Speed footage of a Garand-Thumb.

High-Speed footage of a Garand-Thumb.
Here is a clip of me purposely giving myself a Garand-Thumb, recorded at 1200 frames per second. As you can see, the bolt was resting on the follower and released as soon as I touched it with my thumb.
Not being completely satisfied with the previous clip, I recorded one more. Don’t try this at home (unless you are recording it)

Here is what the clip looks like in real time, to give you an idea of how suddenly the bolt can slam shut.


Garand thumb is no joke. 
I had my Saiga-12 close on my thumb during a competition while loading a single shell. The extractor went into my thumb a bit. I finished the round but got blood all on my gear. 
these gifs hurt to look at.